Floor and Wall Tiling for Homes, Offices and Shops Across Bangalore
Stylfixx lays floor and wall tiles for homes, offices and shops across Bangalore, from a single bathroom to a full 3BHK floor.
We work with vitrified, ceramic, porcelain and large-format 2x4 ft tiles, using polymer tile adhesive and levelling systems so floors stay flat and tiles stay bonded. You can buy the tiles yourself or have us source them.
Tiling Services
Floor Tiling
Living rooms, bedrooms, offices and shops, including skirting.
Wall Tiling
Bathrooms, kitchen dados and feature walls.
Large-Format Tiles
2x2, 2x4 and 4x4 ft vitrified slabs with back-buttering and levelling clips.
Tile-over-Tile
New tiles laid over sound old flooring with no demolition.
Outdoor Tiling
Balconies, terraces, staircases and parking areas with anti-skid tiles.
Grouting
Epoxy grout for wet areas and regrouting of old, stained joints.
Tile Laying Rates in Bangalore (2026)
These are typical 2026 Bangalore market rates; your exact price is fixed in a written quote after the free site visit. Indicative labour rates per sq ft, excluding the cost of tiles:
| Work | Labour only, with cement mortar (per sq ft) | Labour with polymer adhesive (per sq ft) |
|---|---|---|
| Floor tiles up to 2x2 ft (vitrified or ceramic) | ₹25 – ₹40 | ₹40 – ₹60 |
| Large-format 2x4 ft and above | ₹45 – ₹70 | ₹60 – ₹90 |
| Wall tiles (bathroom, kitchen dado) | ₹30 – ₹50 | ₹45 – ₹70 |
| Tile-over-tile (adhesive required) | Not suitable | ₹50 – ₹80 |
| Epoxy grouting (add-on) | ₹15 – ₹30 | ₹15 – ₹30 |
Removal of old tiles, floor levelling, skirting, nosing for steps and debris removal are quoted separately. A written quote lists each item so the total does not change after work starts.
Cement Mortar or Tile Adhesive?
Traditional cement mortar works for small ceramic tiles but bonds poorly to dense vitrified tiles, which is why they sometimes sound hollow or pop up after a few years.
Polymer tile adhesive (to IS 15477) grips vitrified and large-format tiles far better, needs a thinner bed and keeps floor height down. For anything larger than 2x2 ft, and for any tile-over-tile job, we use adhesive.
Our Tiling Process
Survey
We check the base for level, cracks, damp and hollow areas, and measure each room to plan the tile layout and reduce cutting waste.
Layout plan
Starting lines, cut positions and door thresholds are agreed with you before laying, so cut pieces end up at walls, not in the middle of the room.
Base preparation
Loose screed is repaired and the floor is levelled. In wet areas, waterproofing is completed and tested first.
Laying
Tiles are fixed with adhesive or mortar, back-buttered when large, with 2–3 mm spacers and levelling clips to prevent lippage.
Curing and grouting
Joints are cleaned and grouted after the adhesive sets, with epoxy grout in bathrooms and kitchens.
Cleaning and handover
Haze is removed, edges sealed, and you check every tile with us by tapping for hollowness.
Choosing the Right Tiles
Living and bedrooms
Double-charged or glazed vitrified tiles hold up well to daily wear.
Bathroom floors
Matt or anti-skid tiles; avoid high-gloss finishes in wet areas.
Bathroom and kitchen walls
Ceramic or glazed vitrified wall tiles that wipe clean.
Parking and driveways
Heavy-duty vitrified or parking tiles at least 12–15 mm thick.
Stairs
Matching step-and-riser tiles or nosing profiles for grip.
See photos of completed Stylfixx projects in our project gallery.
Why Choose Stylfixx for Tiling
A layout plan before laying, so cuts and joints line up
Adhesive and levelling clips as standard for large tiles
Every tile tap-tested at handover
A workmanship warranty that covers hollow or loose tiles, period written into your quote
