ACP Cladding for Shop Fronts, Home Elevations and Buildings
Stylfixx installs ACP (aluminium composite panel) cladding on shop fronts, house elevations, office buildings and interior feature walls across Bangalore.
We build the aluminium framework, rout and fold the panels into a clean finish, and seal every joint against Bangalore's monsoon rain. You get a 3D elevation design to approve before any panel is cut.
ACP Cladding Services
Shop Front Elevations
Fascia, signage background and full storefront cladding.
Home Elevations
Front facade accents, balcony bands and parapets.
Commercial Facades
Office, showroom and hospital buildings, combined with structural glazing.
Fire-Retardant Cladding
FR-core panels for commercial buildings, taller buildings and escape routes.
Interior Panelling
Feature walls, columns and reception backdrops.
ACP Repairs
Resealing of leaking joints and replacement of bulged, faded or damaged panels.
ACP Cladding Price in Bangalore
These are typical 2026 Bangalore market rates; your exact price is fixed in a written quote after the free site visit. Indicative prices, installed with framework and sealing:
| Work | Panel | Indicative price per sq ft |
|---|---|---|
| ACP sheet only (material) | 3–4 mm, standard brands | ₹70 – ₹180 |
| Exterior cladding with fitting | 4 mm, PVDF coated, standard core | ₹250 – ₹400 |
| Fire-retardant cladding with fitting | 4 mm, FR core, PVDF coated | ₹380 – ₹600 |
| Shop front elevation with grooves and design | 4 mm, PVDF coated | ₹350 – ₹700 |
| Interior wall panelling | 3 mm, polyester coated | ₹180 – ₹300 |
Price depends on panel brand, core type and coating, framework material (aluminium or GI), height and scaffolding, design complexity and the number of cut-outs for signage and lights.
Choosing the Right ACP
Thickness
4 mm panels with thicker aluminium skins for exteriors; 3 mm is fine for interiors and signage.
Coating
PVDF coating for exteriors, because it holds colour under strong sun; polyester coating is for indoor use.
Core
Fire-retardant (FR) core for commercial buildings, high-rises and anything near an exit route. Standard polyethylene core should be limited to low-risk, low-rise uses.
Brands
We use exterior-grade panels from established brands such as Aludecor, Alstrong, Viva or Eurobond, named in your quote, and pass on the manufacturer's coating warranty.
ACP vs HPL vs Stone Cladding
ACP is light, flat and quick to install, comes in hundreds of colours and costs less, which makes it the usual choice for shop fronts and commercial elevations.
HPL (high-pressure laminate) panels resist scratches and impact better and offer realistic wood finishes, but cost more. Stone cladding lasts longest but is much heavier and needs stronger fixing. Many elevations combine ACP with glass or HPL accents.
Our ACP Cladding Process
Survey and measurement
We check the wall surface, plumb and the condition of the parapet and windows.
3D elevation design
You approve colours, groove lines and signage positions on a 3D view.
Framework
Aluminium or GI square tubes are anchored to the wall at the spacing the panel maker specifies, so panels stay flat in wind and heat.
Panel fabrication
Panels are routed and folded into trays on site or in our workshop, leaving room for expansion.
Fixing and sealing
Panels are riveted or screwed to the frame, and joints are sealed with weather-grade silicone to keep rain out.
Film removal and handover
Protective film is removed the same day panels are fixed, so it does not bake onto the surface in the sun.
See photos of completed Stylfixx projects in our project gallery.
Why Choose Stylfixx for ACP Cladding
3D elevation design before work starts
FR-core panels recommended wherever the building and use call for them
Framework spacing and expansion gaps that prevent bulging
An installation warranty written into your quote, plus the panel maker's coating warranty
